Engineering: Centre Lathe Artefact Manufacture Outcome
Show us that you know how to manufacture artefacts using an engineering centre lathe and carbide cutting tools in accordance with legislation and workplace requirements.
- Level 4
- Credits: 10
- $199.00 NZD (GST incl.)
You are required to submit evidence of the following:
- Analyse diagrams and calculate requirements according to recommended guidelines to manufacture artefacts using an engineering centre lathe and carbide cutting tools to meet workplace requirements.
- Operate and manufacture artefacts using an engineering centre lathe and carbide cutting tools following manufacturer’s instructions and recommended guidelines in accordance with health and safety legislation and workplace requirements.
The evidence you are required to provide is described under the heading of Instructions.
All work for this EduBit must be your own.
IN YOUR WORKPLACE: You are required to manufacture two (2) different artefacts operating an engineering centre lathe and carbide cutting tools. The two (2) artefacts must be produced from different materials e.g. stainless steel, mild steel, aluminium, cast iron, bronze, brass, tungsten. You will be required to provide copies of the drawings (to scale) completed by you, your calculations to determine cutting speed and feed rates, a copy of your logbook with five (5) artefacts you have manufactured using the centre lathe with specific details recorded for each artefact, signed and verified by your supervisor/direct line manager.
Download the Logbook below in the Resources section and upload to Task 2.